发布于:2021-04-07 16:18:30  来源:

Because of its small size, wine making equipment is generally used in families or small workshops. The emergence of the equipment not only solves the "heart disease" of many people who love drinking, but also makes pure grain brewing by themselves. In the process of brewing, they use their hands and brains to adjust the pressure of life. Its operation is relatively simple, no complex process, very easy to learn, high efficiency, to meet the needs of customers. Today, I'd like to introduce the main reasons for the blockage of the pulverizer in the brewing equipment.
The first is that the feeding speed is too fast and the load increases, causing the crushing machine of wine making equipment to be blocked. In the feeding process, pay attention to the large deflection angle of ammeter pointer at any time. If it exceeds the rated current, it indicates that the motor is overloaded. If it is overloaded for a long time, it will burn the motor. In this case, the feeding door should be reduced or closed immediately, or the feeding mode can be changed, and the feeding amount can be controlled by increasing the feeder.
There are two kinds of feeders: manual and automatic. The user should choose the right feeder according to the actual situation. Due to the high speed, high load and strong fluctuation of load of sorghum crusher. Therefore, the current of sorghum grinder is generally controlled at 85% of the rated current.
Second, the outlet pipe is not smooth or blocked, which leads to the blocking of wine making equipment crusher. If the feed is too fast, the air outlet of sorghum pulverizer will be blocked; if the feed is not matched with the conveying equipment properly, the air in the discharge pipe will be weakened or blocked after no air; if the bag dust removal products do not pay attention to cleaning the bag regularly, the air volume of induced draft fan will be weakened or blocked after no air. After the fault is found out, the feeding port should be cleared first, the mismatched conveying equipment should be changed, and the feeding quantity should be adjusted to make the equipment operate normally.
Third, teeth claw or hammer pieces, aging, screen holes closed, broken, comminuted material moisture content is too high will make the wine equipment crusher blocked, should be regularly updated broken and seriously aging teeth claw or hammer pieces, keep the grinder in good working condition, and regularly check the screen, comminuted material moisture content should be less than 14%, this can not only improve production efficiency, but also make sorghum crushing The machine is not blocked, and the reliability of the crushing machine of wine making equipment is enhanced.



XML 地图 | Sitemap 地图