发布于:2021-03-26 16:08:06  来源:

As for the horse drawn cart solid wood wine barrel, I believe we all know that the carvings of horse drawn cart are lifelike and bring us a strong visual art effect. Then some people are curious. How should this be carved? What are the steps? Is it complicated? Rentai's editor will introduce you
1: First, cut the wood into pieces. When cutting with a hacksaw, it will destroy the growth rings and fibers of the wood itself. Therefore, in the first step of the manufacturing process, it is necessary to use an artificial axe to make a good oak barrel.
2: For a long time, the wood should be dried. Oak chips must be placed outdoors before making. This process is mainly to increase the water resistance of oak and weaken the astringency of tannin.
3: Put the oak pieces together. Cut the oak that has been dried into pieces that are wide in the middle and small at both ends. Generally, when making a barrel, 32 pieces of oak pieces are needed and fixed with iron bars.
4: A crucial step is to heat and fumigate like a cask. By heating the oak, the oak leaves a smoky flavor, which gives the soaked wine the flavor of almond and bread.
5: Cover the oak barrel for sealing inspection. After passing the inspection, the oak barrel can be processed and put into the market.
6: It is the general term of carving, carving and molding. It refers to the use of various plastic materials (such as gypsum, resin, clay, etc.) or hard materials (such as wood, stone, metal, jade, agate, etc.) that can be carved or carved to create a visual and touchable artistic image with a certain space.
7: The printing plate is reticulated, and the plate forms through-hole and through-hole parts. When printing, the ink is squeezed by the scraping plate to leak from the through-hole part of the plate on the substrate.
The above is the stainless steel liner solid wood barrel carving process and production steps related to the introduction, I hope the above content can bring you some help.



XML 地图 | Sitemap 地图