发布于:2020-11-20 18:18:30  来源:

The paver is welded with 304 square drawing pipe and 304 wire drawing plate, with high strength, neat and beautiful appearance, no rust, easy maintenance and wiping; the internal air chamber is designed with direct drainage outlet and chain duct air chamber, which can be washed with water directly.
The whole machine is controlled by frequency conversion and speed regulation, with stepless adjustment of automatic bending speed. Infrared temperature sensor is added at the discharge port to automatically control the temperature of slag. According to the temperature, the starting and stopping number of fans and the air volume are controlled to achieve the purpose of reducing the temperature of waste grains and energy saving.
The main drive adopts domestic famous brand reducer and first-class large modulus gear transmission, with compact structure, large output torque and is not easy to be damaged; the running speed of the cooling grain chain is controlled by frequency converter, which can be adjusted steplessly in the range of 0.5-2.6m/m to meet the process requirements of the distiller; a temperature sensor is installed at the outlet of the distiller to measure and control the temperature of the outlet in real time and control the running speed of the chain to ensure the spreading effect;
The screen plate is made of 304 stainless steel, the pitch is 100, the width is 1220, the sieve hole is long hole, no flash burr, good air permeability; the roller support at the bottom of the sieve plate, the sieve plate does not deform when the hopper is feeding;
Three or four powerful centrifugal fans are used to cool the distiller's grains. The fans can be variable frequency speed regulation and power frequency operation. According to the outlet temperature, the computer will automatically control the start-up and stop of each fan and power frequency operation, and cooperate with two sets of slag turning rollers to turn the distiller's grains, It can reduce energy consumption and ensure the effect of distiller's grains spreading and airing. After optimization design, each fan's independent air chamber has a special structure, and the air supply is layered to ensure the sieve plate is evenly cooled by wind;
The koji adding machine designed according to the matching process requirements can automatically add koji, with weighing sensor, automatically adjust the frequency of motor to control the ratio of adding starter, which can accurately control the proportion of adding starter; after adding starter, the distiller's grains will fall into the hopper (or distiller's pool) after being turned over by the tablet lifter to ensure the full mixing after adding starter;
不锈钢凉茬机 不锈钢数控凉茬机 酒厂设备
Stainless steel stubble cooling machine stainless steel CNC stubble cooling machine distillery equipment
The paver is equipped with stainless steel operation platform, which can observe the working condition of the machine at any time and adjust it manually at any time.
A stainless steel spray pipe is designed at the outlet of the machine, which is convenient for adding slurry water after the distiller's grains are aired. The water pipe is equipped with a flowmeter and the slurry adding water is uniform and controllable.
The air chamber of the machine is designed with cleaning door, which is convenient for cleaning the residue inside the machine.



XML 地图 | Sitemap 地图