用大容量不锈钢储罐贮存黄酒可以很好地解决问题， 实际上大容量不锈钢罐已广泛应用于啤酒、葡萄 酒、白酒等酒类贮存，均取得了很好的效果，并已普及运 用。但由于黄酒特殊的浓醪发酵、煎酒工艺及酒中含有丰 富的氨基酸等特点，大容量罐贮存时易发生酸败变质、口 味异常等问题，大容量不锈钢储罐贮酒技术尚需深入研究与试验
In fact, large capacity stainless steel tank has been widely used in the storage of beer, wine, liquor and other liquor, and achieved good results, and has been widely used. However, due to the special characteristics of high mash fermentation, frying technology and rich amino acids in rice wine, the problems such as rancidity and abnormal taste often occur during the storage in large capacity tank, so the storage technology of large capacity stainless steel tank needs further research and experiment
The corrosion resistance of stainless steel tank is mainly due to the solid volume formed by chromium and nickel added into iron. When the content of chromium and nickel exceeds a certain value, a protective oxide film is formed on the surface of steel in oxidizing medium to prevent corrosion, which is the passivation effect of chromium and nickel. There is a certain process for pickling and passivation of stainless steel tank.
1: Good corrosion resistance: FRP is a good corrosion-resistant material, which has good resistance to atmosphere, water, acid, alkali, salt, oil and solvent. It has been applied to various aspects of chemical anticorrosion, and is replacing carbon steel, stainless steel, wood, non-ferrous metals, etc.
2: Good designability: according to the needs, flexible design of various structural products, to meet the use requirements, can make the product has a good integrity. Materials can be fully selected to meet the performance of the product, such as: can be designed to resist corrosion, instantaneous high temperature, product in a certain direction with special high strength, good dielectric properties, and so on.
3: Good electrical properties are excellent insulation materials, used to make insulators. Good dielectric property can be protected at high frequency. Microwave transmission is good, and has been widely used in radar radome.
4: Excellent processability: the molding process can be selected flexibly according to the shape, technical requirements, application and quantity of the products. The process is simple and can be formed at one time, with outstanding economic effect, especially for the products with complex shape and less quantity that are not easy to be formed, its process superiority is more prominent.
I believe I have read the stainless steel wine can in this article After the introduction, we will have our own understanding of this aspect and solve the problems in the future.