Taking liquor making equipment as an example, wood and brick mixing are the old traditional wine making equipment, which has been eliminated due to steam leakage, large volume, difficult migration and low liquor yield. The tin liquor making equipment is difficult to popularize because of its high price. Therefore, the most popular wine making equipment on the market is mostly aluminum equipment and stainless steel equipment. So, is the space made of aluminum or stainless steel? The aluminum liquor making equipment still occupies the majority of the market share, and the aluminum density is small, so the aluminum liquor making equipment is usually light and easy to handle. Aluminum has good thermal conductivity, so Xingda aluminum liquor making equipment has high thermal efficiency, fuel saving, fast liquor production and high liquor yield. The cost of aluminum is low, so the price of aluminum wine making equipment is relatively cheap, which is easy to be recognized by consumers. However, due to the obvious weld bead left in the aluminum material welding, the aluminum wine making equipment generally looks a little rough, and due to the low gloss of aluminum, the overall aesthetics of the aluminum wine making equipment is greatly reduced.
There is a popular saying in the industry: aluminum is harmful to human body, so the aluminum brewing equipment is also harmful to the body. In fact, this statement can not stand up to scrutiny
1、 It is not aluminum that is harmful to human body, but aluminum ion. Aluminum can be transformed into aluminum ion only under acidic conditions. The whole liquor distillation process can be said to be neutral environment.
2、 At normal temperature, aluminum is easily oxidized by air and forms dense alumina film on its surface. Due to its stable properties, aluminum oxide can prevent further chemical reaction with aluminum outside.
In addition, aluminum oxide is also a "famous" refractory, which can withstand high temperature of several thousand degrees. However, due to the existence of water in liquor distillation process, the fermented grains liquid can only reach 100 degrees. So the claim that aluminum equipment is harmful to the body is untenable. For those who open a winery or winery.
Another major player in the wine making equipment market is stainless steel brewing equipment. Stainless steel wine making equipment has high gloss, hard and wear-resistant, almost no weld bead after polishing, beautiful and beautiful, so it is favored by consumers. However, the shortcomings of stainless steel brewing equipment can not be ignored, first of all in the performance. The thermal conductivity of stainless steel is poor, which is obviously inferior to that of aluminum, so the liquor yield is low and the fuel consumption is low.
Secondly, the cost of stainless steel is high. The price of general stainless steel wine making equipment is higher than that of the same type of aluminum wine making equipment. In general, the performance of pure stainless steel equipment in the market is very poor, so it is not recommended to choose. Good brewing equipment should be condenser, aluminum steamer barrel made of stainless steel. Liquor making equipment and materials determine the quality is hard.
The good or bad profile of wine making equipment directly affects the quality of wine. Just as we do in cooking, to do a good job in a pot of dishes, we should not only put the appropriate seasoning in every link, but also master the heat, and each link will affect the dishes. Different wine, brewing equipment is not the same. Starting from the material, tin wine making equipment is difficult to popularize due to its high price.
Stainless steel has poor thermal conductivity, low liquor yield and fuel consumption. Aluminum brewing equipment is usually very light, easy to carry, fuel saving, fast wine production, no harm to the body. Therefore, it is suggested to choose aluminum liquor making equipment. Then choose the pottery jar, the main thing is to choose not to leak, generally 300 kg is more suitable. If you dig a hole to make liquor, you should pay attention to waterproof. The size of wine making equipment is determined according to its sales volume or the amount of wine making pigs. Generally speaking, 10-20 pigs need 100-200 type of wine making equipment. 100-200 type is to feed 100-200 Jin of grain at a time, which can make wine twice a day. No matter how much equipment you choose, it is mainly based on the sales volume and demand of liquor.
For more information about the stainless steel liner solid wood wine barrel, please visit our website: There will be a lot of content in the website for reference only.