发布于:2020-05-18 15:40:53  来源:

1、 The selection and treatment of wood should be based on the specific requirements of the guests. Too professional knowledge and operation should be specific. Skip here
2、 The materials to be produced are sawed with numerical control band, the materials of flat plate, and the materials of camber are cut. High efficiency, high quality production, is very important. It is very important to open the material of the tall wooden wine barrel. Different sizes directly affect the quality and appearance of the whole barrel after assembly.
3、 After the opening of the material, but also add, in the two corresponding positions dug out the tenon position. As shown in the figure, the concave position.
4、 After the tenon was dug, the assembly work began. A block of arc-shaped material is arranged in a good line and fixed with supporting small wooden strips, which are processed into semicircles one by one.
5、 The semicircle barrel enters the grinding process. Grinding inner circle - closing low - grinding outer circle. Finally, the hoop is generally galvanized steel skin and stainless steel skin, with the thickness of 3mm.
6、 The success or failure of the cask has entered the final work. After a series of work, such as anti-corrosion, waterproof treatment, fine grinding and painting, the beautiful and tall cask can be packed and shipped.
This article is written by the vending machine. If you want to know more about our products and more details, please pay attention to our website: / your patronage is a great support for us.



XML 地图 | Sitemap 地图